INTERNATIONAL JOURNAL OF SCIENTIFIC DEVELOPMENT AND RESEARCH International Peer Reviewed & Refereed Journals, Open Access Journal ISSN Approved Journal No: 2455-2631 | Impact factor: 8.15 | ESTD Year: 2016
open access , Peer-reviewed, and Refereed Journals, Impact factor 8.15
MODELING AND ANALYSIS OF GANTRYCRANE WITH DIFFERENT MATERIALS USING FEM
Authors Name:
B.N.NAGABABU
, Dr. M. SRI RAMAMURTHY
Unique Id:
IJSDR1901039
Published In:
Volume 4 Issue 1, January-2019
Abstract:
A crane is lifting machinery, discontinuous movement aimed at raising and distributing loads in space, suspended from a hook. Cranes available in the market are grinder travelling crane, overhead travelling crane, jib cranes, wire rope hoist, and gantry cranes. The Gantry cranes are one of the most important mechanical components in the heavy weight lifting and loading in to cargos, into trains, in to heavy truck vehicles, etc. Different types of gantry cranes available in the industries are container cranes, workstation gantry cranes (or) light weight mobile gantry cranes and semi gantry cranes. These vase verity of gantry cranes are differed based on the tonnages and area to be covered for lifting and moving the weights The workstation gantry crane is the most economical solution in all those places where it is desired or civil works or expensive fixed mount metal structures, and where necessary make loading (or) unloading on a regular basis and at points different. • In our project, first, three dimensional geometry of the workstation gantry crane is built in, CATIA. Then analysis of I-section beam, the part which is used to carry the loads in Gantry crane, is carried out by using finite element method in ANSYS software for different loads Apply on I section,clamp,hook and at different positions. Using materials in this project structural steel, 34CrMo4 Chrome steel, carbon steel 1020, AISI 4130. • We estimate the load bearing capacity of I-section beam by placing the loads at different positions i.e. (from left end of I-section, 1stposition is 1300mm, 2ndposition is 4300mm and 3rd position is 5300mm) and by observing von-missies stresses, Shear stress, and deflections generated from static analysis in ANSYS 14.5. finally concluded the suitable material on these 4 materials and which position and findout the deformations in different frequencies by using modal analysis
"MODELING AND ANALYSIS OF GANTRYCRANE WITH DIFFERENT MATERIALS USING FEM", International Journal of Science & Engineering Development Research (www.ijsdr.org), ISSN:2455-2631, Vol.4, Issue 1, page no.229 - 239, January-2019, Available :http://www.ijsdr.org/papers/IJSDR1901039.pdf
Downloads:
000336256
Publication Details:
Published Paper ID: IJSDR1901039
Registration ID:180764
Published In: Volume 4 Issue 1, January-2019
DOI (Digital Object Identifier):
Page No: 229 - 239
Publisher: IJSDR | www.ijsdr.org
ISSN Number: 2455-2631
Facebook Twitter Instagram LinkedIn