Automatic filling Machine using advance Cypress Microcontroller
Mr. Sanjay Sudhakar Mahajan
, Dr.A.J.Patil , Prof. R.R.Karhe
The project is based on Industrial application of Barrel filling or liquid filling in bottles or at petrol pumps. The empty bottle is kept on a platform scale which is a load cell and a fill command is given to the solenoid valve through controller which opens nozzle. After the required liquid is filled in the bottle a command is given by the microcontroller to open the solenoid valve which stops the flow. The project makes use of an 8 bit Programmable System On-Chip (PSOC) CY8C38 series microcontroller which is a 100 pin QFP package. It is a true PSOC Embedded with integrating configurable analog and digital peripherals, memory, and a microcontroller on a single chip. The field of automation has a notable impact in a wide range of industries beyond manufacturing. Automation plays an increasingly important role in the world economy. Filling is a task carried out by a machine that packages liquid products such as cold drinks or water. In past, humans were the main method for controlling a system. More recently electricity has been used for control and electrical control is based on microcontrollers for various purposes like medicines pharmaceutical plants, chemical plants etc. There microcontrollers control the complete working of the system. It is common to use microcontrollers to make simple logical control decision. The automation in bottle filling industry comes with increased electrical components. Essential requirements of each component in the system is important to be studied in ordered to understand how each part works in coordination with other parts in the system. This study mainly includes design, fabrication and control system for automated bottle filling system. A conveyor system with sensors and electromagnetic valve is fabricated for this purpose. The entire sequence of operation is controlled by arduino microcontroller. In small industries bottle filling operation is done manually. The manual filling process has many shortcomings like spilling of water while filling it in bottle, equal quantity of water may not be filled, delay due to natural activities of human etc. This problem faced by small industries compels to design this system. This proposed system is meant for small industries. It aims to eliminate problem faced by small scale bottle filling system. With this system which operates automatically, every process can be smooth and the process of refilling can reduce worker cost and operation cost.
"Automatic filling Machine using advance Cypress Microcontroller", IJSDR - International Journal of Scientific Development and Research (www.IJSDR.org), ISSN:2455-2631, Vol.4, Issue 8, page no.196 - 200, August-2019, Available :https://ijsdr.org/papers/IJSDR1908029.pdf
Volume 4
Issue 8,
August-2019
Pages : 196 - 200
Paper Reg. ID: IJSDR_190917
Published Paper Id: IJSDR1908029
Downloads: 000347043
Research Area: Engineering
Country: -, -, -
ISSN: 2455-2631 | IMPACT FACTOR: 9.15 Calculated By Google Scholar | ESTD YEAR: 2016
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 9.15 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
Publisher: IJSDR(IJ Publication) Janvi Wave
