Effect of Filling Ratio on Thermal Characteristics of Heat Pipe using Titanium Oxide Nanofluid
K.Dinesh Kumar
, A.Ayyappan , J.Kilinton raja , V.Loganathan
heat pipe, angle of inclination, nanofluid, efficiency
An experimental study was carried out to investigate the thermal characteristics of heat pipe using nanofluid and Deionized water (DI water) is presented in this work. The TiO2/water nanofluid is used as one of the working fluid in experimental heat pipe with concentration of 1.0% wt .The test section of the heat pipe is made of copper tube with outer diameter 16 mm, inner diameter 14 mm and length 1000 mm. The heat pipe is tested with (DI water) and nanofluid respectively. This study focused on the effects of heat input, fill ratio and angle of inclination on the thermal efficiency and thermal resistance of heat pipe. The experimental results indicate that the thermal efficiency increases when nanoparticles are added with the DI water (nanofluid) and also the heat pipe which uses nanofluid as working fluid shows lower thermal resistance value when compared to the heat pipe which uses DI water alone.
" Effect of Filling Ratio on Thermal Characteristics of Heat Pipe using Titanium Oxide Nanofluid", IJSDR - International Journal of Scientific Development and Research (www.IJSDR.org), ISSN:2455-2631, Vol.8, Issue 7, page no.1276 - 1280, June-2023, Available :https://ijsdr.org/papers/IJSDR2307189.pdf
Volume 8
Issue 7,
July-2023
Pages : 1276 - 1280
Paper Reg. ID: IJSDR_208000
Published Paper Id: IJSDR2307189
Downloads: 000347261
Research Area: Engineering
Country: perambalur, tamil nadu, India
ISSN: 2455-2631 | IMPACT FACTOR: 9.15 Calculated By Google Scholar | ESTD YEAR: 2016
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 9.15 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
Publisher: IJSDR(IJ Publication) Janvi Wave
